EciAdsl is a free driver for USB ADSL modems embedding a Globespan chipset (GS7070 and GS7470 are supported).
It is released under the terms of the GNU General Public License version 2.

News (page 2/12)

EciAdsl and 2.6.x kernels ()

EciAdsl driver is compatible with 2.6 kernels since version 0.9.
All 2.6 kernels between 2.6.0 and 2.6.6 have to be patched (look at link below).

Update on 2004-06-23: 2.6.7 and 2.6.8.1 kernels are not stable with EciAdsl.
Kernel 2.6.9-rc1 seems stable.

Feel free to report us any stability problem with 2.6 kernels.
Thanks.

Patch for 2.6 kernels (≥ 2.6.0 and ≤ 2.6.6)

34 comments

New synch .bin file ()

New .bin file has been added (synch49.bin).
It was created in Switzerland (Bern), with Sunrise provider (modulation Multimode).

EciAdsl download page

0 comments

New synch .bin file ()

New .bin file has been added (synch48.bin).
It was created in France (Gouzangrez), with Tele2 provider (modulation T1.413).

EciAdsl download page

4 comments

EciAdsl with Mdk 10 and kernel 2.6.X - Install doc ()

Installation doc for EciAdsl driver with Mandrake 10 and 2.6.x kernel has been written by karimj.

EciAdsl with Mdk 10 installation doc

2 comments

New synch .bin file ()

New .bin file has been added (synch47.bin).
It was created in France (Palaiseau), with Club Internet provider (modulation T1.413).

EciAdsl download page

2 comments

Version 0.9 ()

Version 0.9 is available.
This version now supports 2.4 and 2.6 kernels.

Important: for 2.6 kernels, you need to patch the kernel to fix an USB bug.

EciAdsl download page
Patch for 2.6 kernels

2 comments

New page about DSLAM ()

New page has been created to show all possible modifications on DSLAM (look at previous news).
Remember: we are not responsible of any data/hardware damage due to this feature.

Remotely change DSLAM parameters

4 comments

DSLAM parameters ()

New major feature has been added to CVS version of driver.
It is now possible to modify DSLAM parameters remotely.
Main goal is to modify his line speed. For example: from 128 kbits/sec to 512 or from 512 to 1024.
Warning: no test has been made with degrouped line or another speed.
Technically, we send 4 bytes (and 2 for speed) to the DSLAM, after authentication step.
To activate this option, you have to install latest CVS version and add this line to your /etc/eciadsl/eciadsl.conf file:
DSLAM=0x50 0x3A 0x67 0x00 0xZZ 0x00
To change speed from 128 to 512, replace ZZ by 02 (0x0200 = 512), from 512 to 1024 by 04 (0x0400 = 1024).
Warning: all other value or incorrect data may prevent you from connecting definitively (manual intervention of your provider required).
We are not responsible of any data/hardware damage due to this feature.
For any question or to know more about other possible modifications (under test), feel free to contact us.
Have a nice surf!

3 comments

EciAdsl and Free dégroupé ()

EciAdsl driver (version 0.8 or more) is compatible with Free dégroupé.
Changes to do in driver config:
- in /etc/eciadsl/eciadsl.conf (with eciconf.sh): MODE=VCM_RFC1483_ROUTED_IP, STATIC_IP=yes, VPI=8, VCI=36, setup static IP address and gateway (given by Free),
- in /etc/ppp/peers/adsl: remove line with username.

EciAdsl config for Free dégroupé

0 comments

Documentation EciAdsl / OpenBSD ()

A documentation for installing EciAdsl driver on OpenBSD has been written by Benoit Papillault.
This can be useful for installing driver on other BSD versions.

Documentation EciAdsl / OpenBSD

6 comments