==============================================================================
                               E C I A D S L
==============================================================================


Exemple de configuration pour Free dégroupé :


Fichier /etc/eciadsl/eciadsl.conf :

VID1=0547
PID1=2131
VID2=0915
PID2=8000
MODE=VCM_RFC1483_ROUTED_IP
VCI=36
VPI=8
FIRMWARE=/etc/eciadsl/firmware00.bin
SYNCH=/etc/eciadsl/synch07.bin
PPPD_USER=
PPPD_PASSWD=
USE_DHCP=no
USE_STATICIP=yes
STATICIP=82.225.188.xxx
GATEWAY=82.225.188.254
MODEM=ECI HiFocus
PROVIDER=FR..Free
DNS1=212.27.32.176
DNS2=212.27.32.177
SYNCH_ATTEMPTS=2
#PREFERRED_HUB=


Ficher /etc/ppp/peers/adsl :

# this file has been generated by the configuration tool of the ECIADSL driver

#debug
#kdebug 1
noipdefault
defaultroute
pty "/usr/local/bin/pppoeci"
sync
noaccomp
nopcomp
noccp
novj
holdoff 10
updetach

# This will store the pid of pppd in the first line of /var/run/ppp-eciadsl.pid
# and the interface created (like ppp0) on the second line.
linkname eciadsl

# maxfail is the number of times pppd retries to execute pppoeci after
# an error. If you put 0, pppd retries forever, filling up the process table
# and thus, making the computer unusable.
maxfail 10

usepeerdns
noauth

# If your PPP peer answer to LCP EchoReq (lcp-echo requests), you can
# use the lcp-echo-failure to detect disconnected links with:
#
# lcp-echo-interval 600
# lcp-echo-failure 10
#
# However, if your PPP peer DOES NOT answer to lcp-echo request, you MUST
# desactivate this feature with the following line
#
lcp-echo-interval 0

# You may need the following, but ONLY as a workaround
# mtu 1432

persist